KOMENDY

[S4S4N]

Game Settings
CVAR	Default	Min	Max	Recommended	Type	Description
bottomcolor	0	0	255		Integer	Sets the bottom color of your player model which others see.
cl_autowepswitch	2	0	2	0	Integer	0. disables weapon auto switch. 1. auto switch to any weapon you pick up. 2. Auto switch if the weapon you pick up is "stronger".
cl_disablespecs	0	0	1	0	Boolean	Disable players from spectating you.
cl_logocolor	#Valve_Orange				String	Defines the color of your spray: #Valve_Blue, #Valve_Brown, #Valve_Dkgray, #Valve_Ltblue, #Valve_Ltgray, #Valve_Green, #Valve_Orange, #Valve_Red, #Valve_Yellow
cl_logofile	lambda				String	Defines which spray you want to use: 8ball1, andre, camp1, chick1, chuckskull, devl1, gun1, lambda, skull, smiley, splatt, tiki, v_1
default_fov	90	30	130	90/100/105	Integer	Sets the field of view in Half-Life. This will alter with your sensitivity if you try to adjust it. If you use 4:3 with default_fov 90, but wish to maintain aspect ratio on widescreen resolutions, then 16:10 = 100, 16:9 = 105. By lowering default_fov it can be used to get a "zoom" effect even for a gun without a scope.
model	barney				String	Sets your model in game.
name	Player				String	Sets your name.
topcolor	0	0	255		Integer	Sets the top color of your player model which others see.

 

Movement Settings
CVAR	Default	Min	Max	Recommended	Type	Description
cl_backspeed	400	0	*	400	Integer	Sets the speed using the backward key (+back). This should be equal to cl_forward and cl_sidespeed or you will have problems holding forward and left at the same time, for example. The max value is *limited by sv_maxspeed set server side.
cl_forwardspeed	400	0	*	400	Integer	Sets the speed using the forward key (+forward). This should be equal to cl_backspeed and cl_sidespeed or you will have problems holding forward and left at the same time, for example. The max value is *limited by sv_maxspeed server side
cl_movespeedkey	0.52	0.0	0.52	0.52	Float	The multiplier of cl_forward/cl_sidespeed at which you move when +speed is active.
cl_pitchdown	89	8	8	89	Integer	Sets the maximum view angle to look down.
cl_pitchspeed	225	50	8	225	Integer	This is how fast your view looks up/down when using the commands +lookup/+lookdown.
cl_pitchup	89	8	8	89	Integer	Sets the maximum view angle to look up.
cl_sidespeed	400	0	*	400	Integer	Sets the speed using the move left and move right key (+moveleft and +moveright). This should be equal to cl_backspeed and cl_forwardspeed or you will have problems holding forward and left at the same time, for example. This is *limited by sv_maxspeed server side.
cl_upspeed	320	0	*	320	Integer	Sets the speed of swimming up/down in water (+jump and +duck). The max value is *limited by sv_maxspeed server side.
cl_yawspeed	210	0	8	210	Integer	Defines turn speed with +left and +right.

 

Mouse Settings
CVAR	Default	Min	Max	Recommended	Type	Description
lookspring	0	0	1	0	Boolean	Enables automatic view centering when Mouse Look is disabled (-mlook). It should be set when mouse look is enabled(+mlook). It also disable the up and down mouse movements.
lookstrafe	0	0	1	0	Boolean	When enabled, the left/right mouse movements strafe instead of turn.
m_filter	0	0	1	0	Boolean	Toggles mouse filter. Mouse filter runs algorhythms to "smooth" out mouse movements.
m_forward	1	0	8	1	Integer	Defines how sensitively you move forward/backward while moving your mouse. Mouse look needs to be disabled to move forward/backward with your mouse.
m_pitch	0.022	-0.044	0.044	0.022	Float	Sets the sensitivity ratio of up and down mouse movements. Negative numbers causes inverted mouse movements.
m_side	0.8	0.0	8	0.8	Float	Defines how fast you strafe while moving your mouse. It Needs lookstrafe 1 and Mouse Look Enabled(+mlook) to strafe with your mouse.
m_yaw	0.022	8	8	0.022	Float	Sets the sensitivity ratio of left and right mouse movements. Negative numbers cause inverted mouse movements.
sensitivity	3.0	1.0	20.0		Float	Sets mouse sensitivity.
v_centermove	0.150	0.0	8	0.150	Float	Sets the distance to walk before your view centers while mouse look is disabled and lookspring 1 is active.
v_centerspeed	500	0	8	500	Integer	Defines how fast your crosshair is centered while mouse look is disabled and lookspring 1 is active.
zoom_sensitivity_ratio	1.2	0.0	8	1.2	Float	Defines the sensitivity ratio when zoomed.

 

Net Settings
CVAR	Default	Min	Max	Recommended	Type	Description
cl_allowdownload	1	0	1	1	Boolean	Allow maps, models, sounds, sprites, textures to download from a server.
cl_allowupload	1	0	1	1	Boolean	Allow the upload of your custom spray when connecting to a server.
cl_cmdbackup	2	0	8	0	Integer	With each command packet (cl_cmdrate), we can re-send the last few previous movement commands (in case there is packet loss so that we can keep moving smoothly in the face of minor network problems. The default number of "backup" commands that we send is 2, but you can change this number by setting cl_cmdbackup to another number. You can send more than 8 backup commands. Note: sending backup commands will increase your outgoing bandwidth usage.
cl_clockreset	0.1	0.0	8	0.1	Float	If the client clock drifts more than cl_clockreset from the server, it immediately snaps back to use the server value and resets the delta to 0 – usually occurs whilst connecting to a server and maybe if there is a lot of packet loss.
cl_cmdrate	30	15	100	100	Integer	This is the maximum number of command packets you can send to the server per second. The default send's up to 30 command packets per second up to the server. If you are running faster than 30 frames per second, then multiple commands will be put into some packets. You can change the rate of sending command packets to the server by setting the cl_cmdrate cvar.
cl_dlmax	128	16	1024	16	Integer	cl_dlmax determines the “fragment” size for chunks of player decals, etc. that are downloaded while playing the game. Clamped to 16 to 1024 bytes. It can be useful to try and limit decals from taking up a lot of bandwidth – this made a lot more sense back when everyone was on 14.4 kbps modems.
cl_fixtimerate	7.5	0.0	8	7.5	Float	cl_fixtimerate is the number of ms per frame of “clock drift” fixup. Since the server is sending timestamps in every packet, but we only read networking once per frame, we don’t want to just “accept” the server clock, so we use it as a target and “correct” towards it by the fixtimerate (unless the delta becomes too large and we snap the client to the server clock).
cl_gaitestimation	1	0	1	1	Boolean	cl_gaitestimation uses an alternate path for computing the velocity of other players, which is used to drive their lower body (leg) animations.
cl_lc	1	0	1	1	Boolean	This is called "server-side hit computation and lag compensation". This only works if the server is allowing lag compensation (sv_unlag 1) and if the firing player is requesting lag compensation (cl_lc 1 - note that the player must also be predicting weapon firing client-side, too, or cl_lc is ignored). Don't change this. See also cl_lw.
cl_lw	1	0	1	1	Boolean	This is called "client-side weapon firing prediction". What this refers to is the instantaneous set of effects that occur when the fire button is pressed. These effects are all done client-side if client-side weapon firing prediction is enabled (cl_lw is 1). The effects include: starting the weapon firing animation, showing any muzzle flash, creating any ejected shells, drawing decals and bullet puffs at the impact spot on the wall of the map, starting the weapon firing sound, etc. However, the actual determination of whether the shot (for hit-scan weapons at least) hit another player is calculated server-side. If this is disabled, Lag Compensation is also disabled. See cl_lc.
cl_nosmooth	0	0	1	1	Boolean	Defines if prediction errors will be smoothly corrected over the cl_smoothtime time. If set to 1, prediction error smoothing is disabled (same with cl_smoothime 0).
cl_resend	6.0	1.5	20.0	3.0	Float	Delay in seconds before the client will resend the 'connect' attempt. This is when you have problem connecting to server and when you see : "Retrying connection to server #1". This has nothing to do with netcode like people originally thought.
cl_shownet	0	0	2	0	Integer	0 = Do not display any information. 1 = Print current incoming packet size in byte in console. 2 = Print information about the current incoming packet and it's size inconsole.
cl_smoothtime	0.1	0.0	8	0	Float	Defines the amount of time the view will be smoothly correct after a prediction error. If we set cl_smoothtime to 0 (or cl_nosmooth to 1), our interpolation wont be 'smoothed' or corrected and we will see the actual position of the players. Note that this will cause a jump in the players movements, but they will be correct.
cl_solid_players	1	0	1	1	Boolean	Whether the movement prediction engine should treat other players as solid.
cl_timeout	300	0	*	90	Integer	When the server has crashed and you are lagged out, this is how many seconds to wait before automatically disconnecting. The max value is *limited by sv_timeout (server side).
cl_updaterate	20	15	100	100	Integer	The number of updates per second you request from the server.
cl_vsmoothing	0.05	0.0	8	0.0	Float	This is called "View smoothing", it enables interpolation between view vectors. It smooths/interpolates the view origin and angles when riding trains/plats. 0.05 should be good (if you have above 20 fps). 0 disables it and is a performance optimization.
ex_interp	0.1	0.05	0.1	0.05	Float	Sets the amount of time (in seconds) to interpolate in between each successive update (cl_updaterate).
graphheight	64	*	*	64	Integer	Sets the height of net_graph. *Limited by resolution
hpk_maxsize	1.5	0.0	8	0	Float	Defines the maximum size of custom.hpk in your ag folder, custom.hpk is used to store other players logos in. It's value is in MB, a value of 0 means no maximum size.
net_graph	0	0	3	3	Integer	Enables the use of a net_graph. It displays information about your settings, ping, fps, etc. dependent on the type of net graph.
net_graphpos	0	0	2	2	Integer	Sets the position of net_graph. 0 = right, 1 = center, 2 = left
net_graphwidth	192	*	*	192	Integer	Sets the width of net_graph. Higher number is wider net_graph. *Limited by resolution
net_scale	5	0	8	5	Integer	Sets the amount of bytes shown per pixel in net_graph.
net_showdrop	0	0	1	0	Boolean	Shows a message in console when a packet is dropped. This is for both client and server.
net_showpackets	0	0	1	0	Boolean	Shows incoming/outgoing packets. This is for both client and server.
rate	20000	1000	100000	100000	Integer	How many bytes per second you allow the server to send.

 

HUD Settings
CVAR	Default	Min	Max	Recommended	Type	Description
cl_matchreport	0	0	1	0	Boolean	Write a match report after every map change into /ag/matchreport directory.
cl_old_scoreboard	0	0	1	0	Boolean	Set to 1 to use old style scoreboard gui.
cl_only_team_talk	0	0	1	0	Boolean	You can toggle on/off public chat with this variable.
cl_scores	0	0	*	2	Integer	Mini scoreboard displayed on your hud. *Set it to the amount of teams/players you want to view.
cl_scores_pos	"30 30"	*	*	"11 24"	Integer	Controls the position (x,y) of the mini scoreboard on the screen. Default is top left. *Limited by resolution.
cl_show_colors	1	0	1	1	Boolean	Toggles on/off ^(0-9) colors in chat, player names etc.
cl_showfps	0	0	1	0	Boolean	Shows your current FPS in the upper left corner of your screen.
con_color	"255 180 30"	"0 0 0"	"255 255 255"	"255 255 255"	Integer	Sets the color of chat messages (in RGB).
con_notifytime	4	0	8	0	Integer	The amount of time in seconds developer messages display at the top of you screen (only works if developer 1 or 2 is enabled).
hud_capturemouse	1	0	1	1	Boolean	If disabled, there is no mouse cursor in the command menu.
hud_color	"255 160 0"	"0 0 0"	"255 255 255"	"0 2550 0"	Integer	Changes color of the Heads Up Display (in RGB). By using bugged values (2550 2550 2550) you can increase the brightness of the color you wish to use.
hud_centerid	0	0	1	0	Boolean	Centers player id below crosshair. 0 moves it to the left. Toggles whether the player names are shown in the lower left corner or in the middle of the screen. Player name is shown when your aiming at another player.
hud_deathnotice_time	6	0	8	8	Integer	Sets the amount of seconds death notices are shown. 0 disables deathnotices.
hud_draw	1	0	1	1	Boolean	Toggles Heads Up Display on/off.
hud_drawhistory_time	5	0	8	5	Integer	Sets the ammount of seconds HUD pickup items display. 0 disables HUD weapon pickup items displaying.
hud_fastswitch	0	0	1	0	Boolean	Toggles fast weapon switch. If on, then weapons switch immediately when you press a number key (slot1-6 must be bound). This has no effect when you're scrolling through your weapons (using invprev and invnext).
hud_playerid	1	0	1	0	Boolean	Display a players name when you hover your crosshair on their model.
hud_saytext	1	0	1	1	Boolean	Enable chat messages.
hud_saytext_time	5	0	8	8	Integer	Sets the amount of seconds chat messages are shown. 0 disables chat messages.
hud_spectatebar	1	0	1	1	Boolean	Shows the current player and information on how to change spectator modes when spectating.
hud_settings	1	0	1	1	Boolean	Display the server settings.
hud_takesshots	0	0	1	1	Boolean	Enables taking snapshots at the end of maps.
hud_timer	1	0	3	1	Integer	Displays the timer. 0 = disable timer. 1 = time remaining. 2 = time elapsed. 3 = system time.
hud_weapon	1	0	1	0	Boolean	Display the current weapon as a sprite (good for viewmodel off).
traceralpha	0.5	0.0	1.0	1.0	Float	Sets the transparency of the tracers. Tracers only work with the 9mmAR.
tracerblue	0.4	0.0	1.0	0.4	Float	Sets the blue value of the tracers. Tracers only work with the 9mmAR.
tracergreen	0.8	0.0	1.0	0.8	Float	Sets the green value of the tracers. Tracers only workwith the 9mmAR.
tracerlength	0.8	0.0	1.0	0.8	Float	Sets the length of the tracers. Tracers only work in HL the 9mmAR.
traceroffset	30	0	8	30	Integer	Sets how far from your weapon the tracers will appear. Tracers only work with the 9mmAR.
tracerred	0.8	0.0	1.0	0.8	Float	Sets the red value of the tracers. Tracers only work with the 9mmAR.
tracerspeed	6000	0	8	6000	Integer	Sets the speed of the tracers. Tracers only work with the 9mmAR.
v_dark	0	0	1	0	Boolean	Setting this to 1 causes the map to fade in from black upon initial load.

 

Video Settings
CVAR	Default	Min	Max	Recommended	Type	Description
ati_npatch	1	0	1	0	Boolean	Enables ATI's TRUform technology, this will result in higher quality models but will decrease performance.
brightness	1	0	2	2	Integer	Sets the brightness value.
cl_bob	0.01	0.0	1.0	0.01	Float	Sets the amount that the view bobs while you are running. Recommended to use default cl_bob/cl_bobcycle values, as it can misalign your crosshair.
cl_bobcycle	0.8	0.0	8	0.8	Float	Sets how frequent the view bobs while running. I would recommend leaving this at the default value.
cl_bobup	0.5	0.0	8	0.0	Float	Sets the amount the player bobs up while running. Has no effect when cl_bob is 0.
cl_himodels	0			0	Boolean	Enable hi-def models. This is locked to 0 in AG.
cl_waterdist	4	0	8	4	Integer	Compensates the view along the surface of water. (not sure if this cvar works anymore)
developer	0	0	2	0	Integer	Enables developer mode. Developer mode can be used to show information on screen and print advanced information into console. Developer 2 gives more advanced information than developer 1.
d_spriteskip	0	0	1	0	Boolean	Enables fast sprite rendering. It will skip rendering every N scanlines.
fps_max	72.0	20.0	1000.0	100/125	Float	Set the maximum frames per second. You can only have over 100 if fps_override is 1 (on).
fps_override	0	0	1	1	Boolean	Allows for fps greater than 100 if set to 1.
gamma	2.5	1.8	3	3	Float	Sets the gamma value.
gl_affinemodels	0	1	0	1	Boolean	Applies openGL perspective correction hints: e.g.: glHint (GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST);
gl_alphamin	0.25			0.25	Float	Controls how filtering of alpha-masked textures (grates, fences etc.) affects the appearance of edges. Higher values makes these objects look "skinnier". 1 makes them completely disappear.
gl_ansio	0	0	16	0	Integer	For video cards that support anisotropic filtering, it is a method of enhancing the image quality of textures.
gl_clear	0	0	1	1	Boolean	If you enable gl_clear, it will clear the color-buffer. Basically, this means that when the camera can see into the void, either because of the map extending past the farclip plane or there is some kind of corruption of the map data. This is often used as a debugging tool as the 'gl_clear' color is red. It's used by mappers to search for leaks in their maps.
gl_cull	1	0	1	1	Boolean	Enables openGL GL_CULL_FACE setting.
gl_dither	1	0	1	0	Boolean	16 bit openGL rendering can use a form of dithering where the lack of colour depth is hidden by rounding different ways depending on the pixel being drawn. Setting to 0 can theoretically be faster or less hideous. Then again, it could look more bland. It depends on personal preference. It seems that at 32 bit it doesn't have any effect on walls, only on sky.
gl_flipmatrix	0	0	1	0	Boolean	A fix for your crosshair if you are using 3dfx drivers (old video cards, example: Voodoo, Voodoo2, Rush or Banshee).
gl_keeptjunctions	1	0	1	1	Boolean	Keep collinear points added by QCSG/QBSP to fix T-junctions. If you set it to 0 you will see cracks between some textures.
gl_lightholes	1	0	1	1	Boolean	Controls whether to apply lighting to surfaces with “holes” (not sure if this still actually works).
gl_max_size	512	256	512	512	Integer	The maximum pixel size which textures are loaded in. The value must be a multiple of 16 to prevent white textures, when a texture is larger than gl_max_size it will be cropped into that size, if the gl_max_size isn't a multiple of 16, it will become a white texture. Although gl_max_size has no maximum value, a value of 512 is the most realistic maximum value of gl_max_size.
gl_palette_tex	1	0	1	1	Boolean	Enable/disable support for paletted textures. If the GL driver you're using doesn't support the extension, this won't make any difference. But some cards support the extension poorly and support must be disabled using this variable.
gl_picmip	0	0	2	0	Integer	Sets the rendering quality - higher the number, the faster textures are rendered, but at a cost in quality.
gl_polyoffset	0.25	0.001	25.0	0.001	Float	Amount of offset to apply to decals on polygons.
gl_round_down	3	0	5	0	Integer	This is the textures accuracy or the textures rounding. When textures need to be resized they are rounded up or down. Setting it to a low value should make the textures render more accurately and setting it to a high value should make the textures accuracy worse. However this can depend on your video card.
gl_spriteblend	1	0	1	1	Boolean	It enables alpha-blending on sprites. It's like the rendering quality of the sprites (gl_spriteblend 0 = lower quality)
gl_zmax	4096	2048	4096	4096	Integer	Sets max zbuffer size. This sets the max viewable distance. This cvar can only be changed with sv_zmax (server Side).
lambert	1.5			1.5	Float	Sets the lambert level. Lambert is the player model lighting.
lightgamma	2.5	1.81	2.5	1.81	Float	Sets the in game lightgamma.
r_bmodelinterp	1	0	1	0	Boolean	Controls whether moving brush models interpolate their positions (smooths presentation).
r_cachestudio	1	0	1	1	Boolean	Determines whether to cache studio model “hulls” for quicker tests – the cache has a limited size/lifespan. This is a performance optimization.
r_decals	4096	0	*	0	Integer	Sets the decals (spray logos, bullet holes, explosion scorch marks, blood sprayed on ground/walls) limit. It's max value is *limited to the mp_decals value (server side).
r_detailtextures	0	0	1	0	Boolean	Toggle on/off detailed textures.
r_drawviewmodel	1	0	1	0	Boolean	Toggle on/off the view of the weapon model.
r_dynamic	1			1	Boolean	Dynamic lighting is when lighted objects create projections on the walls or objects around them (eg. rpg trails)
r_mmx	0	0	1	0	Boolean	Turns on MMX optimizations. MMX is autodetected (1 = on, 0 = off), but you can force it on or off with this.
r_norefresh	0	0	1	0	Boolean	Setting this to 1 disables the refreshing of the world and HUD.
r_novis	0	0	1	0	Boolean	First you have to know what is VIS: VIS is short for Visible Information Set. This generates what can and can't be seen from certain locations in the map. Half-Life will then use this information when running the game to help speed up rendering, by only drawing what the player can see. If r_novis is 1 (enabled), it would disable the VIS and would calculate everything in the map.
r_wadtextures	0	0	1	0	Boolean	Toggles on/off the use of external wad files.
r_wateralpha	1	0	1	1	Boolean	Enables water alpha-blending. Disabling this causes a mirror like effect similar to gl_clear, from above water.
texgamma	2.0	1.8	3.0	1.8	Float	Sets the texture gamma amount.

 

Sound Settings
CVAR	Default	Min	Max	Recommended	Type	Description
cl_ctf_volume	1.0	0.0	1.0	1.0	Float	Controls the volume of the CTF sounds.
nosound	0	0	1	0	Boolean	Should disable all sound, except for certain instances like a footstep sound when a bullet ricochets.
room_off	0	0	1	1	Boolean	Disable map controlled env_sound entities and play all sounds as normal.
room_type	0	0	28	0	Integer	Mappers use this to add echo effects, the value gets automatically changed when a player enters a zone with the env_sound entity (unless room_off is set to 1). Different values: 0 = Normal (off). 1 = Generic. 2 = Metal Small. 3 = Metal Medium. 4 = Metal Large. 5 = Tunnel Small. 6 = Tunnel Medium. 7 = Tunnel Large. 8 = Chamber Small. 9 = Chamber Medium. 10 = Chamber Large. 11 = Bright Small. 12 = Bright Medium. 13 = Bright Large. 14 = Water 1. 15 = Water 2. 16 = Water 3. 17 = Concrete Small. 18 = Concrete Medium. 19 = Concrete Large. 20 = Big 1. 21 = Big 2. 22 = Big 3. 23 = Cavern Small. 24 = Cavern Medium. 25 = Cavern Large. 26 = Weirdo 1. 27 = Weirdo 2. 28 = Weirdo 3.
suitvolume	0.25	0.0	2.0	0.25	Float	Sets the volume of the HEV-suit. This only applies to single player.
_snd_mixahead	0.1	0.0	8	0.1	Float	Sets the time (in seconds) to delay all sound. Should only be used with severe performance problems. If your sound is skipping or cracking, you may need to change this.
volume	0.2	0.0	1.0	0.2	Float	Sets the volume level.

 

Voice Settings
CVAR	Default	Min	Max	Recommended	Type	Description
voice_enable	1	0	1	1	Boolean	Enables voice communication through microphone.
voice_fadeouttime	0.1	0	8	0.1	Float	The amount in seconds a player's voice fades out at the end of saying something on the microphone. This is so the transition to when they stop talking sounds smoother. Put this at 0 if you want to play sounds using HLSS/HLDJ, since this makes the music fade and sound muffled after a song has been playing continuously.
voice_forcemicrecord	1	0	1	1	Boolean	It sets the recording device to Wave Out Mix, instead of Line 1/Mic. The HL engine tries to make sure the mixer control settings are set properly when the game runs, but not all soundcards work the same way, especially very high-end sound cards like Audigy 2ZS pro cards. If you are having problems with your mic not working after you start a game, try setting this to 0.
voice_inputfromfile	0	0	1	0	Boolean	When set to one and you use +voicerecord, this will not record your voice but rather play a WAV file from your ag/voice_input.wav.
voice_loopback	0	0	1	0	Boolean	When enables it and talk on your microphone, this loops back your own voice so you can hear yourself talk.
voice_recordtofile	0	0	1	0	Boolean	Records your voice to a file when set to 1 and you talk on your microphone. The two files are voice_decompressed.wav (contains no actual sound) and voice_micdata.wav (you speaking).   NIEKTÓRE KOMENDY MOGĄ NIE DZIAŁAĆ W CS BO SĄ Z HALF-LIFE!!!

[Ponczeg :3]

Cała wikipedie mogłeś skopiować jak już kopiujesz z neta 

[Mumin.]

Przynajmniej podaj źródła skąd brałeś

[S4S4N]

W dniu ‎08‎.‎06‎.‎2018 o 15:13, Area napisał:

Cała wikipedie mogłeś skopiować jak już kopiujesz z neta 

Po piewsze to strona internetowa moja i mojego kumpla z half-life i jak bym podał to pewnie byś się pruł że się reklamuję 

Skopiować to możesz swoje szare komórki.

Wbiliście zobaczyć czy podałem źródło? Współczuje wam.

[Madziaa<3]

http://www.agp.22web.org/cfg/list-of-cvars.html?i=1 <-- jakby ktoś chciał mieć bardziej czytelne. 

[S4S4N]

Hehe, to właśnie strona mojego kumpla izzo.

Dzięki za reklamę ???

[Ab3L]

Skończ w końcu zachowywać się jak niewychowany gnojek i naucz się kulturalnie odpowiadać innym. Speedzik dobrze zrobił pisząc to co napisał bo jednak wypadałoby podać źródło z którego skopiowałeś cały tekst obojętnie czy strona należy do Ciebie czy też nie, a tak poza tym to jesteśmy na polskim forum więc mogłeś chociaż przetłumaczyć znaczenie tych komend zamiast iść na łatwiznę i zrobić zwykłe copy paste...  i teraz gwóźdź programu, nawet na tej stronie wszystko jest skopiowane z innej strony, jedynie niektóre komendy zostały pominięte ale opisy są identyczne... jeśli ktoś chce pełen spis to bez problemu znajdzie użytkownika od tych komend po nazwie ze zdjęcia  

 

[S4S4N]

18 godzin temu, Ab3L napisał:

Skończ w końcu zachowywać się jak niewychowany gnojek i naucz się kulturalnie odpowiadać innym. Speedzik dobrze zrobił pisząc to co napisał bo jednak wypadałoby podać źródło z którego skopiowałeś cały tekst obojętnie czy strona należy do Ciebie czy też nie, a tak poza tym to jesteśmy na polskim forum więc mogłeś chociaż przetłumaczyć znaczenie tych komend zamiast iść na łatwiznę i zrobić zwykłe copy paste...  i teraz gwóźdź programu, nawet na tej stronie wszystko jest skopiowane z innej strony, jedynie niektóre komendy zostały pominięte ale opisy są identyczne... jeśli ktoś chce pełen spis to bez problemu znajdzie użytkownika od tych komend po nazwie ze zdjęcia  

 

HAHAH jak chcesz dopiero może być niekulturalnie, źródło znalazłem i brakuje tam komend co wychodzi na to że to od nas skopiowali.

Siedzisz na forum przez całe życie a nie potrafisz dobrze przejrzeć internetu klaunie.

Zrobić poradnik i jeszcze zamiast być wdzięczni to się czepiają frajerzy.

[Ab3L]

Oho, internetowy kozaczek właśnie się zbulwersował i ponownie zaczyna wyzywać, ojej tak mi przykro że uraziłem twoje uczucia (zgadza się, "twoje" celowo z małej, cry mode on -chcesz aby inni odnosili się do ciebie z szacunkiem to naucz się okazywania tego samego). Widzę że fajnie tam masz skoro żyjesz w jakimś własnym świecie z własnymi źródłami. Strona scripting elxdraco istniała na długo przed waszymi kopiowanymi wypocinami, a komend jest co najmniej dwa razy więcej... i nie, nie zrobiłeś poradnika. Tylko go skopiowałeś  

[S4S4N]

Widać że masz z deklem, liżcie sobię wzajemnie dupy.

Zobacz na komendy HUD settings i poszukaj ich na tamtej stronie.

Kozaczysz to ty bo się wpierdalasz i szukasz sensacji.

I jak tu się nie zdenerwować

Temat do zamknięcia.

[wQ.]

Więc zamykam.

[wQ.]

Temat został zamknięty przez moderatora.
Jeśli nie zgadzasz się z tą decyzja zaraportuj ten post.

Pozdrawiamy,
Ekipa Pochylnia.pl